Dundee Based • Serving Tayside, Angus, Grampian & Edinburgh
Health Protection & Statutory Compliance

Mould Diagnostic & Eradication Service

Professional property mould investigation, thermal bridging & moisture diagnostics, safe HEPA spore containment, and HSE-approved fungicidal eradication—protecting occupant health and ensuring full compliance with current Scottish Housing Law.

Diagnostic Inspection Report

A set fee applies for our comprehensive on-site diagnostic survey and formal written compliance report for homeowners, private landlords, letting agents, and property factors.

  • Pin & non-invasive surface moisture profiling
  • Ambient relative humidity & dew-point readings
  • Thermal imaging to pinpoint cold spots & thermal bridging
  • Clear written diagnostic report & remediation specification
4-Stage Technical Protocol

Our Mould Diagnostic & Eradication Process

Painting over black mould without eliminating moisture sources and embedded fungal roots leads to rapid regrowth. We follow a four-stage diagnostic and eradication system.

1

Moisture & Root-Cause Inspection

Hygrometer and surface moisture readings to distinguish condensation, thermal imaging to highlight cold spots and thermal bridging—backed by a clear written report for landlords, factors, or homeowners.

2

Containment & Safe Spore Removal

Controlled HEPA extraction and wet-wipe spore containment so toxic spores are not dispersed into clean rooms during treatment.

3

HSE-Approved Fungicidal Wash

Deep biocide fungicidal treatment applied to plaster, masonry, and timber to kill embedded mould roots and prevent spore germination.

4

Anti-Mould & Thermal Coatings

Application of stain-blocking primers and breathable, fungicidal anti-mould paints (plus anti-condensation coatings on cold exterior walls) for a clean, lasting finish.

Statutory Legal Framework in Scotland

Current Scottish Law on Damp & Mould

Scottish landlords, social housing providers, and property managers face strict statutory obligations to investigate and eradicate damp and mould hazards promptly.

Awaab’s Law in Scotland • Housing (Scotland) Act

Strict Statutory Investigation & Repair Deadlines

Under Scotland’s damp and mould statutory standards (Awaab’s Law provisions), landlords must treat damp and mould as urgent health hazards rather than tenant lifestyle issues:

  • Emergency Hazards: Must be investigated and made safe within 24 hours.
  • 10 Working Days: Significant damp and mould hazards must be formally investigated within 10 working days of report.
  • 3 Working Days: A written summary of findings must be issued to the tenant within 3 working days of inspection.
  • 5 Working Days: Remedial safety works must commence within 5 working days of concluding the investigation.
Housing (Scotland) Act 2006 (Amended)

The Scottish Repairing Standard

Private rented properties in Scotland must meet the statutory Repairing Standard at the start of a tenancy and at all times throughout:

  • Properties must be wind and watertight and in all other respects reasonably fit for human habitation.
  • Fixed heating, mechanical extraction, and ventilation systems must be in a reasonable state of repair and proper working order.
  • Tenants can apply directly to the First-tier Tribunal for Scotland (Housing and Property Chamber), which can issue legally binding Repairing Standard Enforcement Orders (RSEOs) and Rent Relief Orders.
Housing (Scotland) Act 1987 & 2006

The Tolerable Standard & Environmental Health

The Tolerable Standard is the minimum legal threshold required for any house in Scotland to be fit to live in:

  • A home fails the Tolerable Standard if it is not substantially free from rising or penetrating damp or suffers from severe condensation mould affecting health.
  • Must have satisfactory thermal insulation and adequate ventilation.
  • Local authorities (including Dundee City Council, Angus, Aberdeenshire, and City of Edinburgh Council) hold statutory powers to serve enforcement notices under the Environmental Protection Act 1990 for statutory nuisances.

Why Independent Written Evidence Matters for Scottish Landlords

Simply wiping walls with household bleach leaves no diagnostic audit trail and does not resolve underlying cold bridging or moisture ingress. Our written diagnostic report provides timestamped hygrometer data, thermal imagery, and a compliant remediation specification suitable for letting agent files, insurance claims, and Housing Chamber evidence.

Health & Safety Dangers

Why Indoor Mould is a Serious Health & Safety Hazard

Indoor mould species such as Stachybotrys chartarum (toxic black mould), Aspergillus, Penicillium, and Cladosporium release microscopic airborne spores, microbial volatile organic compounds (mVOCs), and mycotoxins.

Respiratory & Systemic Health Risks to Occupants

  • Severe Asthma & Airway Inflammation: Inhaled spores trigger acute asthma attacks, chronic wheezing, coughing, shortness of breath, and sinusitis.
  • Fungal Infections & Immunocompromised Risk: Species such as Aspergillus can cause allergic bronchopulmonary aspergillosis (ABPA) and invasive respiratory infections in vulnerable adults, elderly residents, infants, and pregnant women.
  • Mycotoxin & Allergen Exposure: Prolonged exposure contributes to chronic fatigue, headaches, skin rashes, eye irritation, and weakened immune response.

Safe Remediation & COSHH / HSE Controls

Dry brushing, scraping, or vacuuming mould with a standard domestic vacuum launches millions of hazardous spores into the breathing zone, contaminating entire properties.

  • HEPA Filtration & Containment: We isolate affected zones and extract spores safely using H-class HEPA filtration and controlled wet-wiping.
  • HSE-Approved Biocides: Only Health & Safety Executive (HSE) approved fungicidal treatments are applied under strict COSHH safety controls.
  • Structural & Electrical Safety: Persistent damp degrades plasterwork, causes timber wet/dry rot, and creates electrical safety hazards when moisture penetrates sockets and light fittings.
Complete Diagnostic-to-Decorating Accountability

How Frankie Coulter Painting and Decorating Protects Landlords & Property Factors

With over 30 years of industry experience across Dundee, Tayside, Angus, Grampian, and Edinburgh, we bridge the gap between diagnostic moisture reporting and guaranteed permanent redecoration—delivering compliant written findings, safe spore eradication, and breathable anti-mould finishes under one trusted contractor.

Book Set-Fee Inspection
Arrange an Inspection

Book a Set-Fee Mould Diagnostic Inspection Report

We offer a clear set fee for our full moisture & thermal diagnostic inspection and written compliance report. Contact our team directly or submit your property details below.

Set-Fee Diagnostic Inspection & Report

Every inspection is charged at a straightforward set fee covering full on-site hygrometer and surface moisture testing, thermal imaging for cold bridging, root-cause diagnosis, and a formal written report for landlords, property factors, letting agents, or homeowners.

Office Telephone 01382 528237
Mobile Telephone 07595 822 167
Email Address enquiries@fcpd.co.uk

Send Inspection Request to enquiries@fcpd.co.uk